SNAKE BRACE / W201*
Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems.
- intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure
- the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole
- intended for a single user
- the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions
- the minimum strength of the construction should be designed according to EN 795 (if not in accordance with EN 795, the load bearing capacity may be reduced)
- Snake Brace can be loaded in any direction only if also allowed by the construction in which is anchored
- can be used only with compatible connectors with locking mechanisms according to EN 362
| Type | Length | Code |
|---|---|---|
| S 300 | 30 cm | W2018Y030 |
| S 600 | 60 cm | W2018A060 |
| S 900 | 90 cm | W2018R090 |
| S 1200 | 120 cm | W2018B120 |
| M 300 | 30 cm | W2019Y030 |
| M 600 | 60 cm | W2019A060 |
| M 900 | 90 cm | W2019R090 |
| M 1200 | 120 cm | W2019B120 |
Weight: S 300 – 162 g ; M 300 – 395 g
Material: S – dyneema, alloy, steel; M – PAD, alloy, steel
Strength: 18 kN
Length: 30, 60, 90, 120 cm
EN 795-B CE 1019
Normes
EN 795-B
EPI antichute.
Dispositifs d'ancrage.
Dispositifs d'ancrage temporaires mobiles.
